Choose Clover RL when you want single- and three-needle liners in one clearly labelled LT/MT range. Choose Pinky Pro RL when your grouped-line selection needs two, three, five or seven points. For a three-point 0.25 mm starting configuration, compare Clover 0803RLLT with Pinky Pro 0803RL; then let taper information, housing features and pack format complete the choice.
This is a useful comparison when you already know you need a round liner, but the two product menus seem to overlap. The overlap is real at some diameters and counts. The extra choices on either side explain why both ranges can have a place in a professional PMU assortment.
Choose the grouping you actually need
For an isolated brow stroke or fine detail, Clover RL includes single-needle options. For a compact grouped line, it also includes three-point configurations. Start with Clover 0801RLLT for a 0.25 mm single point or 0803RLLT for three 0.25 mm points, according to the mark you want to build.
Pinky Pro separates its single-point 1R product from the grouped RL product. Its RL menu offers two, three, five and seven points. Choose the grouped range when you want a compact liner with the option to expand the working footprint for contours or concentrated shading.
That difference makes the first decision straightforward: Clover RL is the route here for one- and three-point selection in one product; Pinky Pro RL extends the grouped selection to five and seven points and adds a two-point option.
Compare like-for-like three-point options
Hold the point count at three before comparing individual wire diameter. This gives you a clearer view than choosing by the RL label alone.
Finer three-point options
0.18 mm: Pinky Pro 0403RL. 0.20 mm: Clover 0603RLMT.
Overlapping three-point diameters
0.25 mm: Clover 0803RLLT and Pinky Pro 0803RL. 0.30 mm: Clover 1003RLLT and Pinky Pro 1003RL.
A thicker-wire three-point option
0.35 mm: Clover 1203RLLT.
If your established three-point work calls for 0.18 mm, Pinky Pro 0403RL gives you that route. If you want 0.20 mm with Medium Taper or 0.35 mm with Long Taper, Clover supplies those specific alternatives.
At 0.25 or 0.30 mm, both ranges give you three-point choices. Keep the full configuration in the comparison: diameter and count describe part of the tip, while taper and the cartridge construction complete the tool you are selecting.
Make taper a separate decision
Clover marks Long Taper as LT and Medium Taper as MT. Its 0.25 mm single-point choices include both 0801RLLT and 0801RLMT; the 0.30 mm single-point choices include 1001RLLT and 1001RLMT. These pairs let you compare taper while keeping count and diameter constant.
Pinky Pro's 1002RL, 0803RL and 1003RL have a specified 5 mm long taper. This is useful when that documented taper length matters to your established selection. Clover's LT designation identifies its long-taper option; keep each range's actual description with the configuration rather than transferring Pinky Pro's 5 mm value to Clover.
For a fuller grouped footprint at the same 0.25 mm wire diameter, Pinky Pro 0805RL and 0807RL add five- and seven-point choices. That is a grouping decision, separate from a single-point LT-versus-MT comparison.
Consider the cartridge around the tip
Both ranges use 304 stainless-steel needles, EO sterilisation and a universal-type cartridge connection for compatible machines and grips. Their visible housings help you observe the tip area as you work.
Clover pairs a translucent housing with an internal textured pigment channel and an elastic membrane with four reinforced supports. Pinky Pro combines a transparent medical-grade PC housing with a silicone safety membrane. These are concrete construction features to include alongside your geometry preference, particularly when you are selecting a recurring working cartridge.
Keep machine fit tied to the actual connection you use. Once that is established, you can focus the comparison on the tip, housing and configuration menu.
Finish the purchase with the right pack
Clover RL comes in boxes of 20 of the selected configuration. Pinky Pro RL offers 10, 20, or 10 with a finger sleeve. A 10-pack is useful when adding a less familiar grouped Style to your assortment; a 20-pack puts more of a regularly used configuration on hand.
Our recommendation is Clover for the combined single/three-point LT/MT menu, and Pinky Pro for the wider grouped-count choice. At the overlapping 0.25 and 0.30 mm three-point configurations, use the taper description, construction you prefer and required pack to finish the decision. The selected product's live price gives the current cost for that exact configuration and quantity.
If you are still deciding between a liner and a shading arrangement, start with the PMU cartridge selection guide. Once the family is settled, return to the precise configuration rather than choosing by series name alone.
Clover and Pinky Pro questions
Which range offers five- and seven-point RL?
Pinky Pro RL offers 0805RL and 0807RL, both at 0.25 mm individual wire diameter. The compared Clover RL menu offers single- and three-point configurations.
Can I compare 0803RL and 0803RLLT directly?
Both identify three 0.25 mm points in their respective ranges. Clover explicitly includes LT in its label; Pinky Pro 0803RL has a documented 5 mm long taper. Retain those full descriptions when comparing.
Does Clover RL include a 10-pack?
The Clover RL product offers 20 cartridges per box. Pinky Pro RL provides 10- and 20-cartridge package routes.